Optional Equipment

· Rectangular (Standard) or Round Insulated Jackets (4” ¾ lb Fiberglass Insulation)

·         Mini-Saddles (for Vertical Tanks with Insulated Jacket above 102” OAH)

·         Skid Mounted with Several Small Tanks and Heat Exchangers (To Fit Through Doorways)

·         Inlet Baffle(s)

·         Copper Coat Fittings

·         Pressure Relief Valve

·         P & T Relief Valve

·         Drain Valve

·         Pressure Gauge (4-1/2” with Cock)

·         Temperature Gauge (3” Dial with 9” Stem)

MODEL “MV” / “MH”

ELGE Lined and Unlined Storage Tanks with a Shell and Coil HeatExchanger mounted on the side of the tank. This allows Maintains on the Heat Exchanger without Draining the Tank.

Standard Features

·         Lined and Unlined Water Storage Tanks, Available in Horizontal

             or Vertical Configurations

·         Shell and Coil Heat exchanger

·         ASME Code Construction – 125 PSI to 160 PSI Design

             (Higher Design Pressures Available)                                                               

·         National Board Registered Pressure Vessel

·         Carbon Steel or Stainless Steel Construction

·         Available Capacities: 125 Gallons to 5500 Gallons

                        (Larger Capacities Available)

·         Available BTU: 20,000 to 10,000,000

·         Choice of Four Protective Linings [with Magnesium Anode(s)]:

o      Our epoxy  Seal (for Water Up to 160F & Demineralized Water Up to 180F)

o      Copper Coat (for Water Up to 160F & Demineralized Water Up to 180F)

o      Nickel Coat (for Water Up to 160F & Demineralized Water Up to 180F)

o      Cement (for Water Temperatures from 180F to 250F)

·         12” x 16” Manway

·         Lifting Lugs (2)

·         Support Saddles (Horizontal Models) / Base Ring or Angle Legs (Vertical Models)

·         NPT Tappings for:

o      Inlet

o      Outlet

o      Recirculation

o      Drain

o      Tank Stat

o      Relief Valve

o      P &T Gauge(s)