HOME

 ABOUT US 

 

OUR DESIGN 

 CASE STUDIES  

 

 

 PRODUCT LINE  

DISTRICT HEAT

 PACKAGES

CONTACT INFO 

packaged steam heating heaters

type dshh

 

 

Description

ELGE’s Steam Heating Heater type DSHH is a pre-piped unit including:

·       ELGE Shell&Coil HX Type AR

·       All piping with flange/thread connections

·       Control equipment specification

 

The control equipment specification is coordinated by ELGE to meet customer and equipment requirements utilizing industry standard products. The specification shall include:

·       Temperature Control valve

·       Temperature Control Unit

·       Temperature Control Sensor

·       Condensate Temperature Control Sensor

·       Strainer

·       Air Vent

·       Pressure Gauge

ELGE will design and customize the unit to supply heating water to meet your requirements. The pre-piped DSHH-unit will be prepared to accept customer’s equipment from the control specification. Using the purchase specification from ELGE, Customer procured control equipment is field mounted on the ELGE DSHH pre-piped unit for final mechanical / electrical connections.

These packaged units are able to supply heating for demands from 500 to 2000 MBtu/h.

Design Benefits

·       Heating Water in tubes to minimize deposits/overheating.

·       Steam in shell to eliminate damage to coil from hammer, high velocity erosion, or shock.

·       A spring shape coil to minimize expansion and contraction stresses.

·       A coil which is self-cleaning as it moves.

·       Compact and simple in design.

·       Reliable and robust design.

Control Equipment

ELGE Packaged DSHH can be equipped with almost any  well known brand of control equipment  It can be electronic or self-actuated.

All ELGE DSHH can also be equipped with Overheat Protection System.

Give us your requirements and we will customize a design especially for you, including an ELGE pre-piped DSWH-unit and a purchase specification for the control equipment..

 

Installation Conditions

·       Using the lowest possible supply temperature will reduce fouling and maintenance.

·       System must be installed upright

Condensate return must be drained to atmospheric pressure.

 

ELGE DSHH Standard Features

 

1.   ELGE Shell&Coil HX Type AR .

2.   Out-door Temperature Control Sensor

3.   Temperature Control Sensor

4.   Condensate Temperature Control Sensor

7.   Thermostatic Air Vent

8.   Pressure Gauge

9.   Temperature Control Valve

10. Strainer

11. Temperature Control Unit

 

 

 

BA HERCS Corp., 25-70 Ulmer Street College Point,

New York 11354, USA  Phone (001) 718 539 4893

Fax (001) 718 886 4301